Tips and Tricks for Laser Engraving

Tips and Tricks for Laser Engraving

Tips and Tricks for Laser Engraving

Running a laser engraver printer is not as a difficult as many would tend to think. Even with the improvement in technology, the laser engraver has remained more of a technical machine, and thus it is not difficult to learn the curves. Just like any other technical machine, all you need is to learn a few tips and tricks, and you will engrave like a pro. In this article, we are going to look at some of the essential tips and tricks for laser engraving.

Prepare the Engraving

Preparation of the engraving is one of the critical stages, and you cannot afford to mess it up. There are a few stages that you need to follow strictly for a successful engraving process. First, you must learn to do proper masking. This is important to ensure that edges of the surface to be engraved do not get stained. Masking is simply done by the use of masking tape. It is also important to note that the masking tape does not in any way decrease the power. Second, presets. It could be possible to use the same setting for a number of engraving task. Since the laser engraver printer is controlled by a computer, you should save the settings for later use. That will make it easy to work on the future projects. Test Cuts: Even with presets, you run a test to ensure that everything is set.

 The Power of Layers

If you are making different parts of the design, it is important that you design different layers in a file. That is why it important to invest in a good graphics program that can help you creates these layers for efficient engraving. Layers help to control the order of cuts and have multiple parts and designs in one file.

Wood Engraving

Now that you have designed the logo or the image, it is time to burn it on a piece of wood. But not every wood will give great results. Avoid natural wood since it is not uniform, and the engraving might not be that great. Good plywood with a more uniform top layer would be the perfect option.

Once you get the results and you are satisfied, then you can go ahead with the engraving process. If not, you can reset laser engraver printer and start all over again or make the necessary adjustments. That is how easy it is to work with laser engraver printer. Just a few tips and tricks and you are good to go.

rimrock